Verifying the Configuration of Control Parameters for Establishing Neighbor Relationships

Prerequisites

After the control parameters for establishing the neighbor relationship are adjusted, you can check information about the PIM interface and the PIM neighbor.

Procedure

Run the display pim [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check PIM information on an interface.
Run the display pim [ vpn-instance vpn-instance-name | all-instance ] neighbor [ neighbor-address | interface interface-type interface-number | verbose ] ^* command to check information about PIM neighbors.

Parent Topic: Adjusting Control Parameters for Establishing Neighbor Relationships

< Previous topic