Verifying the Configuration of Control Parameters for Prune Messages

Procedure

• Run the display pim ipv6 interface [ interface-type interface-number | up | down ] [ verbose ] command to check IPv6 PIM information on an interface.
• Run the display pim ipv6 control-message counters [ message-type { assert | graft | graft-ack | hello | join-prune | state-refresh | bsr } | interface interface-type interface-number ] ^* command to check the number of sent or received IPv6 PIM control messages.
• Run the following commands to check the IPv6 PIM routing table.

  • Run the display pim ipv6 routing-table [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | flags flag-value | fsm | incoming-interface { interface-type interface-number | register } | mode { dm | sm | ssm } | outgoing-interface { exclude | include | match } { interface-type interface-number | none | register } ] ^* [ outgoing-interface-number [ number ] ] command to check detailed information about the IPv6 PIM routing table.

  • Run the display pim ipv6 routing-table brief [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | incoming-interface { interface-type interface-number | register } ] ^* command to check brief information about the IPv6 PIM routing table.