Resetting the PIM Status of the Specified Downstream Interfaces in IPv6 PIM Entries

Context

You can reset the Join/Prune and Assert status on a specified downstream interface in an IPv6 PIM entry. MLD status and static groups on this interface are not affected.

Resetting the PIM status of downstream interfaces will trigger the sending of Join/Prune packets, which affects multicast services.

Procedure

Run the reset pim ipv6 routing-table group ipv6-group-address mask ipv6-group-mask-length source ipv6-source-address interface interface-type interface-number command in the user view to reset the PIM status of specified downstream interfaces in specified IPv6 PIM entries.