(Optional) Statically Specifying the Interface Status of a Clock Device

Context

In a PTP clock synchronization network, all clock nodes work in the master-slave relationship. By default, the master-slave relationships between clock nodes are calculated through the BMC algorithm. To manually determine the master-slave relationship between clock nodes, specify the clock status of various interfaces excluding the TC interface.

Procedure

Run system-view
The system view is displayed.
Run ptp set-port-state enable slot slot-id
The function to statically specify the interface status is enabled.
Run interface interface-type interface-number
The view of the interface whose status is to be statically configured is displayed.
Run ptp port-state { slave | passive | master | premaster | listening | faulty | disabled | initializing }
The interface status is statically specified.