Verifying the PW Redundancy Configuration

The configurations of PW redundancy in a scenario where CEs are asymmetrically connected to PEs are complete.

Run the display mpls l2vc [ vc-id | interface interface-type interface-number | remote-info [ vc-id ] | state { down | up } ] command to check L2VC information.
Run the display mpls l2vc track admin-vc interface loopback interface-number [ upe ] command to check service PWs or switching PWs associated with the mPW.
Run the display mpls switch-l2vc [ ip-address vc-id encapsulation encapsulation-type | state { down | up } ] command to check switching PW information.