Verifying the MQC Configuration

Procedure

• Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
• Run the display traffic behavior user-defined [ behavior-name ] command to check the traffic behavior configuration.

• Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the configuration of a specified user-defined traffic policy.

• Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan [ vlan-id ] ] { inbound | outbound } [ verbose ] command to check information about ACL-based simplified and MQC-based traffic policies applied to the system, a VLAN, or an interface.

  

  The display traffic-applied command cannot be used to check information about ACL-based simplified and MQC-based traffic policies applied to a sub-interface. However, traffic policies can be applied to a sub-interface.

• Run the display traffic policy { interface [ interface-type interface-number [.subinterface-number ] ] | vlan [ vlan-id ] | ssid-profile [ ssid-profile-name ] | global } [ inbound | outbound ] command to check the traffic policy configuration.

  

  Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support sub-interfaces.

  Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6720-HI, S6730S-H, and S6730-H support ssid-profile [ ssid-profile-name ].

• Run the display traffic-policy applied-record [ policy-name ] command to check the application records of a specified traffic policy.