Configuring RIP to Deny Host Routes

Context

In certain cases, the switch receives a large number of host routes with 32 bits from the same network segment. These host routes are unnecessary for routing, and they waste network resources. You can configure the switch to reject all the host routes it receives.

Procedure

Run system-view
The system view is displayed.
Run rip [ process-id ]
The RIP view is displayed.
Run undo host-route
Host routes are not added to the RIP routing table.

By default, host routes can be added to the routing table on the switch.

The undo host-route command is invalid for RIP-2.