< Home

Configuring the Network Management Function for RIP

Pre-configuration Tasks

Before configuring the network management function for RIP, configure basic RIP functions.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run rip mib-binding process-id

    RIP is bound to the MIB.

    This command is used to bind a RIP process ID to MIBs and specify the ID of the RIP process that accepts Simple Network Management Protocol (SNMP) requests.

Verifying the Configuration

  • Run the display current-configuration command to view the binding relationships of RIP.

Parent Topic: RIP Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >