Controlling the Receiving of RIPng Routes

Before controlling the receiving of RIPng routes, configure basic RIPng functions.

Run system-view
The system view is displayed.
Run ripng [ process-id ]
The RIPng view is displayed.
Run filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } import
The RIPng process is configured to filter received routes.

You can use ACL6, route policy and IPv6 prefix lists to filter received RIPng routes, allowing only the routes matching ACL6, route policy and IPv6 prefix lists to be added to RIPng routing tables.

Run the display ripng process-id database [ verbose ] command to check all the active routes in the RIPng database.
Run the display ripng process-id route command to check all the RIPng routes learned from other switches.