< Home

Configuring an RD Filter

Context

You can use an RD filter when using the RD attribute to filter routes in a VPN.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip rd-filter rd-filter-number { deny | permit } route-distinguisher &<1-10>

    An RD filter is configured.

Verifying the Configuration

  • Run the display ip rd-filter [ rd-filter-number ] command to check information about a configured RD filter.

Parent Topic: Configuring Filters
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic