Verifying the Configuration

Procedure

• Run the display engine session application command to check application identification entries.
• Run the display application command to check information about applications in the system.
• Run the display application name aging-time command to check the aging time of the entry associated with application identification.
• Check the traffic policy configuration result.
  • Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic behavior user-defined [ behavior-name ] command to check the traffic behavior configuration.

  • Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the user-defined traffic policy configuration.

  • Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan [ vlan-id ] ] { inbound | outbound } [ verbose ] command to check the information about ACL-based simplified and MQC-based traffic policies applied to the system, a VLAN, or an interface.

    

    Traffic policies can be applied to a sub-interface, but the display traffic-applied command cannot be used to check information about ACL-based simplified and MQC-based traffic policies applied to the sub-interface.

  • Run the display traffic policy interface [ interface-type interface-number[.subinterface-number ] ] inbound command to check information about the traffic policy.
  • Run the display traffic-policy applied-record [ policy-name ] command to check the record of the specified traffic policy.