< Home

Verifying the Configuration of Dynamic BFD to Monitor a BGP Tunnel

Prerequisites

The dynamic BFD for BGP tunnel function has been configured.

You can view BGP BFD session information on the ingress of the BGP tunnel.

Procedure

  • Run the display mpls bfd session protocol bgp [ fec fec-address [ verbose ] ] command to check information about a BFD session with the protocol type of BGP on the ingress on an E2E BGP tunnel.
  • Run the display mpls lsp protocol bgp verbose command to check the BFD session status of BGP LSPs.
Parent Topic: Configuring Dynamic BFD to Monitor a BGP Tunnel
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic