Prerequisites
The configurations of basic SNMPv1 functions are complete.
Procedure
- Run the display snmp-agent community command to check community names.
- Run the display snmp-agent sys-info version command to check the enabled SNMP version.
- Run the display acl acl-number command to check ACL rules.
- Run the display snmp-agent mib-view command to check MIB views.
- Run the display snmp-agent sys-info contact command to check the administrator's contact information.
- Run the display snmp-agent sys-info location command to check the location of the switch.
- Run the display current-configuration | include max-size command to check the maximum size of an SNMP packet that can be sent and received by the device.
- Run the display current-configuration | include trap command to check the configuration of the trap function.
- Run the display snmp-agent trap all command to check current and default status of all traps of all features.
- Run the display snmp-agent target-host command to check information about the target host.
- Run the display snmp-agent extend error-code status command to check whether the device is enabled to send extended error codes to the NMS.
- Run the display snmp-agent notify-filter-profile command to check the configurations of the filtered traps.