Verifying the Basic SNMPv3 Function Configuration

The configurations of basic SNMPv3 functions are complete.

Run the display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] ^* command to check user information.
Run the display snmp-agent sys-info version command to check the enabled SNMP version.
Run the display acl acl-number command to check ACL rules.
Run the display snmp-agent mib-view command to check MIB views.
Run the display snmp-agent sys-info contact command to check the administrator's contact information.
Run the display snmp-agent sys-info location command to check the location of the switch.
Run the display current-configuration | include max-size command to check the maximum size of an SNMP packet.
Run the display current-configuration | include trap command to check trap configuration.
Run the display snmp-agent trap all command to check current and default status of all traps of all features.
Run the display snmp-agent target-host command to check information about the target host.
Run the display snmp-agent inform [ address udp-domain ip-address [ vpn-instance vpn-instance-name ] params securityname { security-name | cipher security-name } ] command to check configurations of all or specified target hosts that send informs.
Run the display snmp-agent extend error-code status command to check whether the function that the device sends extended error codes to the NMS is enabled.