Pre-configuring an AS Name

Procedure

1. Run system-view

   The system view is displayed.

2. Run uni-mng

   The uni-mng view is displayed.

3. Run as name as-name model as-model mac-address mac-address

   An AS name is configured.

   By default, an AS uses its system default name-device MAC address as its name after going online.

   Ensure that the model as-model and mac-address mac-address settings are consistent with the actual settings.

   If no AS name is pre-configured before an AS goes online, you can also run this command to modify the AS name after an AS goes online. In this situation, the AS must meet the following conditions:

   • The AS is not bound to any service profile.
   • The AS is not added to any AS group.
   • Ports of the AS are not added to any port group.