Configuring an AS in Centralized Mode (Direct Configuration)

Context

Service configurations can be delivered to ASs through service profiles. Apart from this method, you can also run the direct-command command on the parent to deliver some service configurations directly to ASs.

For services that can be directly configured for a single AS, see Service Configuration Supported on an AS.

Procedure

Run system-view
The system view is displayed.
Run uni-mng
The uni-mng view is displayed.
Run as name as-name
The AS view is displayed.
Run direct-command view { system | interface-type interface-number | stack-port member-id/port-id } command command-text
A command is directly delivered to an AS.

Example

This example shows how to enable loopback detection on GE0/0/1 of AS1.

<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] as name as1
[HUAWEI-um-as-as1] direct-command view gigabitethernet 0/0/1 command loopback-detect enable

Verifying the Configuration

Run the display uni-mng commit-result as-direct-config command to check the configuration delivery result.
Run the display uni-mng execute-failed-record as-direct-config as name as-name command to check execution failure records after the configuration is delivered to an AS.