Verifying the Kompella VLL Configuration

Context

After configuring Kompella VLL successfully, you can check BGP information, connection, and VPN target list of Kompella VLL and L2VPN information on the PE device.

Procedure

Run the display bgp l2vpn { all | group [ group-name ] | peer [ [ peer-ip-address ] verbose ] | route-distinguisher route-distinguisher [ ce-id ce-id [ label-offset label-offset ] ] } command to check the BGP information of the Kompella VLL.
Run the display mpls l2vpn connection [ vpn-name [ remote-ce ce-id | down | up | verbose ] | summary | interface interface-type interface-number ] command to check information about the connection in Kompella mode.
Run the display mpls l2vpn [ l2vpn-name [ local-ce | remote-ce ] ] command to check the VLL information on the PE.
Run the display mpls l2vpn { export-route-target-list | import-route-target-list } command to check the VPN target list of the Kompella VLL.