This section describes how to monitor the VLL running
status by viewing the VLL connection information.
Run the following commands in any view to check the running status
of VLL.
Procedure
Run the display vll ccc [ ccc-name | type { local | remote } ] command
to check information about the CCC connection.
Run the display mpls static-l2vc [ interfaceinterface-typeinterface-number ] command to check information
about the SVC VLL connection.
Run the display mpls l2vc [ vc-id | interfaceinterface-typeinterface-number ] command to check information
about the local Martini VLL connection on the PE.
Run the display bgp l2vpn { all | group [ group-name ] | peer [ [ peer-ip-address ] verbose ] | route-distinguisherroute-distinguisher [ ce-idce-id [ label-offsetlabel-offset ] ] }
command to check BGP information about the Kompella VLL.
Run the display mpls l2vpn
connection [ vpn-name [ remote-cece-id | down | up | verbose ] | summary | interfaceinterface-typeinterface-number ] command to check information about the Kompella VLL.
Run the display mpls l2vpn
label-space command to check information about label
space distribution and different types of labels in the label cache.
Run the display mpls l2vpn vpws [ interfaceinterface-type
interface-number [ verbose ]
] command to check information about VPWS service.
Run the display mpls label-stack vll interfaceinterface-typeinterface-number command
to check the information about label stacks in VLL networking.