Configuring the Alarm Report Function

Context

You can configure the alarm report function, which helps you obtain the real-time running status of the VLL network and facilitates operations and maintenance.

Procedure

Configure alarm report for the CCC VLL.
1. Run system-view
  
  The system view is displayed.
2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwcccvcdown | hwcccvcup }
  
  Alarm report for the CCC VLL is enabled.
  
  By default, alarm report for the CCC VLL is disabled.
Configure alarm report for the Martini VLL.
1. Run system-view
  
  The system view is displayed.
2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwpwvcbackup | hwpwvcdeleted | hwpwvcdown | hwpwvcstatuschange | hwpwvcswitchptow | hwpwvcswitchwtop | hwpwvcup }
  
  Alarm report for the Martini VLL is enabled.
  
  By default, alarm report for the Martini VLL is disabled.
Configure alarm report for the SVC VLL.
1. Run system-view
  
  The system view is displayed.
2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwsvcdeleted | hwsvcdown | hwsvcswitchptow | hwsvcswitchwtop | hwsvcup }
  
  Alarm report for the SVC VLL is enabled.
  
  By default, alarm report for the SVC VLL is disabled.
Configure alarm report for the Kompella VLL.
1. Run system-view
  
  The system view is displayed.
2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwkompellaswitchptow | hwkompellaswitchwtop | hwkompellavcdown | hwkompellavcup }
  
  Alarm report for the Kompella VLL is enabled.
  
  By default, alarm report for the Kompella VLL is disabled.

Verifying the Configuration

After completing the alarm report for a VLL, you can run the following command to check whether alarm report is enabled.

Run the display snmp-agent trap feature-name l2vpn all command to check whether alarm report is enabled for the L2VPN module.