Verifying the BGP AD VPLS Configuration

Prerequisites

All BGP AD VPLS configurations are complete.

Procedure

Run the display vsi [ name vsi-name ] [ verbose ] command to check information about a VPLS VSI.
Run the display vsi name vsi-name statistics command to check information about VSI statistics, including the PW and AC status.
Run the display l2vpn ccc-interface vc-type { all | vc-type } [ down | up ] command to check information about the interface used by an L2VPN connection.
Run the display vsi bgp-ad { import-vt | export-vt | remote-export-vt } command to check the VPN target information about the local and remote devices.
Run the display vsi bgp-ad remote vpls-id vpls-id command to check member information about a specified remote PE.
Run the display vpls connection [ bgp-ad | vsi vsi-name ] [ down | up ] [ verbose ] command to check information about a BGP AD VPLS connection.
Run the display vpls forwarding-info [ vsi vsi-name [ peer peer-address [ negotiation-vc-id vc-id | remote-site site-id ] ] | state { up | down } ] [ verbose ] command to check forwarding information of all VSIs.
Run the display vsi services { all | vsi-name | interface interface-type interface-number | vlan vlan-id } command to check information about the AC interface associated with the VSI.
Run the display bgp l2vpn-ad [ route-distinguisher route-distinguisher ] routing-table [ vpls-ad ] [ ipv4-address | statistics ] command to check BGP L2VPN-AD routes.