Configuring the Upper and Lower Alarm Thresholds for VPLS VCs

Context

A device supports only a limited number of VPLS VCs. After the total number of VPLS VCs created on a device exceeds a certain limit, the device performance deteriorates. To prevent device performance deterioration caused by excessive VPLS VCs, configure the upper and lower alarm thresholds for VPLS VCs. You can flexibly adjust the upper and lower alarm thresholds for VPLS VCs based on actual requirements.

Procedure

Run the system-view command to enter the system view.
Run the mpls l2vpn command to enter the MPLS L2VPN view.
Run the mpls l2vpn vsi-pw limit threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command to configure the upper and lower alarm thresholds for VPLS VCs.
By default, the upper and lower alarm thresholds are 80% and 70% respectively.
- upper-limit-value specifies the upper alarm threshold for VPLS VCs. If the proportion of VPLS VCs created to the maximum VPLS VCs allowed reaches this threshold, a VPLS VC threshold-crossing alarm is reported.
- lower-limit-value specifies the lower alarm threshold for VPLS VCs. If the proportion of VPLS VCs created to the maximum VPLS VCs allowed falls below this threshold, a VPLS VC threshold-crossing clear alarm is reported.
- upper-limit-value must be greater than lower-limit-value.