On an AC + Fit AP network, one AC manages many APs. Usually, you need to perform the same configurations on the APs. In this situation, you can add the APs to an AP group and perform configurations uniformly in the AP group, which simplifies operations. All APs in the group use the same configurations.
Each AP must and can only join one AP group. An AP group contains configurations shared by all APs. You can configure configurations specific to a single AP in the AP view.
By default, an AP automatically joins the AP group default. The AP group default cannot be deleted, but you can modify configurations in the default AP group.
By default, an AP group has the following profiles bound: AP system profile default, 2G radio profile default, 5G radio profile default, regulatory domain profile default, WIDS profile default, and AP wired port profile default.
The system view is displayed.
The WLAN view is displayed.
An AP group is created, and the AP group view is displayed.
By default, the system provides the AP group default.
After an AP group is created, you need to add APs to the AP group so that the APs can use configurations in the group. For details, see Adding APs.