Binding a Radio Profile

Context

After the configuration in a radio profile is complete, you need to bind the radio profile to an AP group, AP, AP radio, or AP group radio. After being delivered to APs, the configuration in a radio profile can take effect on the APs.

After a radio profile is applied to an AP group or AP, the parameter settings in the profile take effect on all radios of the AP group or AP. After a radio profile is applied in the AP group radio or AP radio view, the parameter settings in the profile take effect on the specified AP radio or radios in the AP group. The configuration under an AP and AP radio has a higher priority than that under an AP group and AP group radio. The 2G and 5G radio profiles take effect on 2G and 5G radios, respectively.

Procedure

Bind a radio profile to an AP group.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-group name group-name command to enter the AP group view.
4. Run the radio-2g-profile profile-name { radio { radio-id | all } } or radio-5g-profile profile-name { radio { id | all } } command to bind the radio profile to the radio.
  By default, the 2G radio profile default and 5G radio profile default are bound to an AP group.
Bind a radio profile to an AP.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
4. Run the radio-2g-profile profile-name { radio { radio-id | all } } or radio-5g-profile profile-name { radio { id | all } } command to bind the radio profile to the radio.
  By default, no 2G radio profile or 5G radio profile is bound to an AP.
Apply a radio profile in the AP group radio view.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-group name group-name command to enter the AP group view.
4. Run the radio radio-id command to enter the radio view.
5. Run the radio-2g-profile profile-name or radio-5g-profile profile-name command to bind the radio profile to the radio.
  By default, the 2G radio profile default and 5G radio profile default are bound to an AP group radio.
Apply a radio profile in the AP radio view.
1. Run the system-view command to enter the system view.
2. Run the wlan command to enter the WLAN view.
3. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
4. Run the radio radio-id command to enter the radio view.
5. Run the radio-2g-profile profile-name or radio-5g-profile profile-name command to bind the radio profile to the radio.
  By default, no 2G radio profile and 5G radio profile are bound to an AP radio.