Delivering Configurations

Context

Configurations in the AP provisioning view are not automatically delivered to APs. You have to manually deliver them to APs.

After the configuration is committed, the AP receives the configuration and compares the configuration with its local configuration.

If they are consistent, the AP does not process the received configuration.
If they are different, the AP saves the committed configuration and automatically restarts, and the received configuration takes effect.

If the name or static IP address of an AP is specified in the AP provisioning view, the configuration is delivered only to the AP by specifying the AP name or MAC address, but cannot be delivered to APs in the specified AP group.

If you commit configurations to a large number of APs simultaneously, some of the APs may fail to receive the configurations. In this case, you are advised to commit the configurations again.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run provision-ap
The AP provisioning view is displayed.
Run commit { ap-name ap-name | ap-mac ap-mac-address | ap-id ap-id | ap-group ap-group-name | all }
The configurations are delivered to an AP, a group of APs, or all APs.