Modifying the AP Group to Which APs Belong

Context

If the current AP group is not applicable to an AP or the AP is added to an incorrect AP group, you can modify configurations to add the AP to a new AP group.

Modifying the AP group results in AP restart and service interruption. Exercise caution when performing this operation.

You can also modify AP groups in the AP provisioning view. For details, see Configuring Parameters for APs to Go Online.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run ap-regroup { ap-name ap-name | ap-id ap-id } new-group new-group-name
An AP is added to a new AP group.

The AP group to which an AP is added must have been created using the ap-group name group-name command.