Resetting an AP

Context

If an AP cannot work properly after being upgraded, reset the AP. You can run the display ap all command to check the AP State field to determine whether an AP is working properly. If the State field displays name-conflicted, ver-mismatch, config, config-failed, committing, or commit-failed, an AP fails to work properly.

Exercise caution when resetting an AP because services on the AP will be interrupted.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run ap-reset { all | ap-name ap-name | ap-mac ap-mac | ap-id ap-id | ap-group ap-group | ap-type { type type-name | type-id type-id } }
APs are reset.