Checking STA Running Statistics

After STAs successfully associate with an AP, you can run the following commands in any view to monitor the STA running status.

Run the display station { ap-group ap-group-name | ap-name ap-name | ap-id ap-id | ssid ssid | sta-mac sta-mac-address | vlan vlan-id | all } command to check STA access information.
Run the display station statistics [ sta-mac sta-mac-address | ap-name ap-name | ap-id ap-id ] command to check STA statistics.
Run the display ap sta-signal strength { ap-name ap-name | ap-id ap-id } [ radio radio-id ] command to check the average signal strength of STAs on an AP.