Configuring the AP Channel Mode

Context

In scenarios where indoor and outdoor boundaries are unclear, such as subway and train platforms, it is recommended that outdoor APs be deployed. When a large volume of data is transmitted, outdoor APs in outdoor channel mode have no sufficient channels to meet data transmission requirements. In this case, you can run the channel-load-mode indoor command to set the channel mode of the APs to indoor mode, so that data can be transmitted on more channels.

This function is supported only by the AP8030DN, AP8130DN, AP8050TN-HD, AP8050DN, AP8150DN, AP8050DN-S, AP8082DN, AP8182DN.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run regulatory-domain-profile name profile-name
A regulatory domain profile is created, and the regulatory domain profile view is displayed.

By default, the system provides the regulatory domain profile default.
Run channel-load-mode indoor
The AP channel mode is set to indoor mode.

The default channel mode of an AP is outdoor mode.
Run quit
Return to the WLAN view.
Bind the regulatory domain profile to an AP group or AP.
- Binding the regulatory domain profile to an AP group
  1. Run the ap-group name group-name command to enter the AP group view.
  2. Run the regulatory-domain-profile profile-name command to bind the regulatory domain profile to the AP group.
    
    By default, the regulatory domain profile default is bound to an AP group.
- Binding the regulatory domain profile to an AP
  1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
  2. Run the regulatory-domain-profile profile-name command to bind the regulatory domain profile to the AP.
    
    By default, no regulatory domain profile is bound to an AP.