Configuring Terminal Attributes for the VTY User Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run wlan

   The WLAN view is displayed.

3. Run ap-system-profile name profile-name

   An AP system profile is created, and the AP system profile view is displayed.

   By default, the system provides the AP system profile default.

4. Run user-interface vty ui-number idle-timeout minutes [ seconds ]

   The timeout disconnection function is configured.

   By default, the timeout period is 5 minutes.

5. Run user-interface vty ui-number screen-length screen-length

   The number of lines on each terminal screen is set.

   By default, the number of lines to be displayed on a terminal screen is 24.

6. Run quit

   Return to the WLAN view.

7. Bind an AP system profile to an AP group or AP.
   • Binding an AP system profile to an AP group.
     1. Run the ap-group name group-name command to enter the AP group view.

     2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

   • Binding an AP system profile to an AP.
     1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.

     2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.