Checking Information About Wi-Fi Tag Location
Context
After the AP that has WLAN location enabled successfully receives the configuration information, it replies a response packet. You can run the display command to check information about LBS statistics and APs that have successfully received tag information.
Procedure
- Run the display wlan location config-info aeroscout { ap-id ap-id | ap-name ap-name } command to check LSB information of the AP that has successfully received tag information.
- Run the display wlan location statistics aeroscout command to check the LBS statistics about AeroScout tags and MUs.
If APs are configured to report AeroScout tag and MU packets to the AeroScout location server directly but not through an AC, the display wlan location statistics aeroscout command cannot display location statistics, and all fields are displayed as "0".
- Run the display wlan location device-info tag { all | ap-id ap-id | ap-name ap-name } command to check tag location information on the AP.