Configuring a Mesh Whitelist

Context

To prevent a trackside AP from connecting to the vehicle-mounted AP along a different track from the trackside AP, you need to add the MAC address of the vehicle-mounted AP along the local track to Mesh whitelists of all trackside APs.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run mesh-whitelist-profile name whitelist-name
A Mesh whitelist profile is created, and the Mesh whitelist profile view is displayed.

By default, no Mesh whitelist profile is available in the system.
Run peer-ap mac mac-address
MAC addresses of neighboring APs that are allowed to connect to an AP are added to the Mesh whitelist profile.

By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.

When configuring vehicle-ground fast link handover, add MAC addresses of vehicle-mounted APs allowed to connect to a trackside AP to a whitelist.
Run quit
Return to the WLAN view.
Enter the radio view.
- Enter the AP group radio view.
  1. Run the ap-group name group-name command to enter the AP group view.
  2. Run the radio radio-id command to enter the radio view.
- Enter the AP radio view.
  1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
  2. Run the radio radio-id command to enter the radio view.
Run mesh-whitelist-profile whitelist-name
The Mesh whitelist profile is bound to the AP radio.

By default, no Mesh whitelist profile is bound to an AP radio.