Configuring Mesh Radio Parameters

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface wlan-radio wlan-radio-number

   The radio interface view is displayed.

3. Run channel { 20mhz | 40mhz-minus | 40mhz-plus | 80mhz } channel [ index index ]

   The working bandwidth and channel are configured for a radio.

   By default, the working bandwidth of a radio is 20 MHz, and no working channel is configured for a radio.

   The vehicle-mounted and trackside APs must be configured with the same channel and bandwidth.