Configuring ACL-based Priority Remarking

Procedure

1. Run system-view

   The system view is displayed.

2. Run wlan

   The WLAN view is displayed.

3. Run traffic-profile name profile-name

   A traffic profile is created and the traffic profile view is displayed.

   By default, the system provides the traffic profile default.

4. Run the traffic-remark { inbound | outbound } { ipv4 | ipv6 | l2 } acl { acl-number | name acl-name } { dot11e dot11e-value | dscp dscp-value } or traffic-remark { inbound | outbound } ipv4 acl { acl-number | name acl-name } l2 acl { acl-number | name acl-name } { dot11e dot11e-value | dscp dscp-value } to configure ACL-based priority remarking in the traffic profile.

   By default, ACL-based priority re-marking is not configured in a traffic profile.

   The traffic-remark command can reference a numbered ACL rule that is not configured. You can configure the referenced ACL rule after running this command.

   You can only configure a maximum of eight ACL-based packet re-marking rules in the same direction. The sequence in which ACL rules takes effect follows the rule configuration sequence. To change the current packet re-marking rules, delete all the related configurations and reconfigure the ACL-based packet re-marking.

5. Run quit

   Return to the WLAN view.

6. Run vap-profile name profile-name

   The VAP profile view is displayed.

7. Run traffic-profile profile-name

   The traffic profile is bound to the VAP profile.

   By default, the traffic profile default is bound to a VAP profile.