Configuring SEA

Context

When the SIP (eSpace) service runs on a WLAN, you can enable the SEA function so that the device reports performance statistics about SIP traffic (such as IP addresses and port numbers of calling and called parties, and call quality data) to CampusInsight. In this manner, CampusInsight can analyze network performance and locate faults.

Pre-configuration Tasks

Before configuring SEA, complete the following task:

Configure basic WLAN services.

Procedure

Run system-view
The system view is displayed.
Run wlan
The WLAN view is displayed.
Run vap-profile name profile-name
A VAP profile is created, and the VAP profile view is displayed.
Run service-experience-analysis enable
The SEA function is enabled.

By default, the SEA function is disabled.
(Optional) Run service-experience-analysis sip-snooping port port-number
The SIP listening port number is configured.

The default SIP listening port number is 5060.
Run quit
Return to the WLAN view.
Bind the VAP profile to an AP or an AP group. The details are not described here.

Verifying the Configuration

Run the display vap-profile name profile-name command to check the SEA configuration.