Licensing Requirements and Limitations for WLAN QoS

Involved Network Elements

APs mentioned in this document are Huawei AP products. You are advised to use Huawei APs to connect to the AC.
You can run the display ap-type all command to check the default AP types supported by the device.
When central APs and RUs are used, ensure that their versions are the same. For example, if the central AP version is V200R007C10, the RU version must be V200R007C10.

**Table 1** Mapping between switch versions and AP versions
Product Software Version	AP Software Version
V200R019C10	V200R019C10 V200R019C00 V200R010C00 V200R009C00 V200R008C10 V200R008C00 V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R019C00	V200R019C00 V200R010C00 V200R009C00 V200R008C10 V200R008C00 V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R013C00	V200R010C00 V200R009C00 V200R008C10 V200R008C00 V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R012C00	V200R009C00 V200R008C10 V200R008C00 V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R011C10	V200R008C10 V200R008C00 V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R011C00	V200R007C20 V200R007C10 V200R006C20 V200R006C10
V200R010C00	V200R007C10 V200R006C20 V200R006C10
V200R009C00	V200R006C20 V200R006C10
V200R008C00	V200R005C30 V200R005C20 V200R005C10
V200R007	V200R005C20 V200R005C10
V200R006	V200R005C00

Licensing Requirements

When the device is used as a WLAN AC, the number of online APs supported by the device is controlled by licenses. The device supports a maximum of 16 online APs. To increase the number of online APs supported by the device, apply for and purchase a license from the agent.

AP resource license-1AP for WLAN access controller
AP resource license-16AP for WLAN access controller
AP resource license-32AP for WLAN access controller
AP resource license-64AP for WLAN access controller
AP resource license-128AP for WLAN access controller
AP resource license-512AP for WLAN access controller

For details about how to apply for a license, see Obtaining Licenses in the S1720, S5700, and S6700 Series Switches License Usage Guide.

Feature Support in V200R019C10

This feature is supported only by the following models: S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6720-HI, S6730S-H, and S6730-H.

Feature Limitations

Configuring WMM

By default, WMM is disabled on a terminal. To implement the WMM function, you must enable WMM on terminals and devices concurrently.

Configuring Priority Mapping

The tunnel priority mapping is applicable to scenarios where data packets are transmitted in tunnel forwarding mode.

Configuring Priorities for Lync Packets

The switch supports priority configuration for Lync packets since V200R010C00.

The switch can be interconnected to one server where Lync SDN Manager is installed. The version of Lync SDN Manager must be 2.0.

Configuring User Isolation on a VAP

Layer 2 user isolation in a VAP takes effect only for unicast packets.

The dynamic EDCA and dynamic rate limit functions are not available for the AirEngine 8760-X1-PRO, AirEngine 8760R-X1, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 6760R-51, AirEngine 6760R-51E, AirEngine 5760-51, AirEngine 5760-22W, and AirEngine 5760-22WD.