How Can Packet Loss Be Avoided When Two Interfaces at Both Ends of a Link Work in Auto-Negotiation Mode and Use the Half-Duplex Mode?

You can configure the local and remote devices to work in non-auto-negotiation mode, and set their duplex mode to full-duplex to avoid packet loss.

The configuration is as follows:

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo negotiation auto
[HUAWEI-GigabitEthernet0/0/1] duplex full

Parent Topic: FAQ About Ethernet Interfaces

< Previous topic Next topic >