Can I Directly Delete Inner VLAN IDs from QinQ Configuration?
- If the switch is running V100R005 or an earlier version,
one or more inner VLAN IDs in QinQ configuration cannot be directly
deleted. You must delete the current selective QinQ configuration,
and then reconfigure the inner VLAN IDs that do not need to be deleted.
For example, if the port vlan-stacking vlan 10 to 20 stack-vlan
100 command is configured on the switch, you can perform the following
operations to delete inner VLAN 15:
- Run the undo port vlan-stacking vlan 10 to 20 stack-vlan 100 command to delete the current selective QinQ configuration.
- Run the port vlan-stacking vlan 10 to 14 stack-vlan 100 and port vlan-stacking vlan 16 to 20 stack-vlan 100 commands
to reconfigure the inner VLAN IDs that do not need to be deleted.
- If the switch is running a version later than V100R005,
one or more inner VLAN IDs in QinQ configuration can be directly deleted.