Configuration Notes

Support for Web System Functions

Table 1 describes the support of different series switches for web system functions.

The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

A hyphen (-) indicates that this function is supported by all switch models.

**Table 1** Support for web system functions
Function	Subfunction	Switch Models Supporting the Function	Remarks
Monitoring	Summary (Standalone)	-	-
	Summary (SVF)	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, S6720-EI, S6720-SI, S6720S-SI and S6720S-EI support SVF mode.	Summary is supported only in SVF mode.
	User	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function. The S6720-EI, S6720S-EI, S6720-SI, S6720S-SI, S6730-S, and S6730S-S support this function in SVF mode.	This node is only available in the NAC unified and non-NETCONF modes.
	Topology (SVF)	-	Topology is supported only in SVF mode.
	Wired Service (SVF)	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, S6720-EI, S6720-SI, S6720S-SI and S6720S-EI support SVF mode.	Wired Service is supported only in SVF mode.
	Wireless Service	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
Configuration	Quick Config	-	-
	SVF Quick Config (SVF)	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, S6720-EI, S6720-SI, S6720S-SI and S6720S-EI support SVF mode. The S6720-EI, S6720-SI, S6720S-SI, S6720S-EI, S6730-S, and S6730S-S do not support AP Addition and AP User-Side Service.	SVF Quick Config is supported only in SVF mode.
	Advanced SVF Config (SVF)	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, S6720-EI, S6720-SI, S6720S-SI and S6720S-EI support SVF mode.	Advanced SVF Config is supported only in SVF mode.
	Basic Services	Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support connecting the router.	-
	Advanced Services	-	-
	Security Services	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support ACL Config, ACL Reference, AAA, AAA Service App, AAA Profile Mgmt and STA Identification.	ACL Config, ACL Reference, AAA, AAA Service App, AAA Profile Mgmt and STA Identification are only available in the NAC unified mode. For S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI, ACL and User Access Control are only available in the NAC common mode.
	Fast WLAN Config (Standalone)	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Wireless Services	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
Diagnosis	Intelligent Diagnosis	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	One-Click Information Collection	-	-
	Wireless Packet Capturing	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Ping	-	-
	Trace RouteC	-	-
	AAA Test	-	-
	RF-Ping	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	AP-Ping	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Interference Detection	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Trace User/AP	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Configuration Check	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
Maintenance	System Maintenance	-	-
	AP Maintenance	Only the S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	This node is only available in the NAC unified and non-NETCONF modes.
	Device Upgrade	-	-
Network (Standalone)	Role Configuration	For the support on EasyOperation, see Licensing Requirements and Limitations for EasyDeploy in "EasyDeploy Configuration" in the S2720, S5700, and S6700 V200R019C10 Configuration Guide - Basic Configuration.	The network area is available only in the stand-alone mode. The device that cannot work as the Commander can only be configured as the client, and the Summary, Deployment, Batch Configuration, and Power Consumption menus are not available. If the topology function is not enabled on the Commander, the Summary, Deployment, and Batch Configuration menus are not available.
	Summary
	Deployment
	Batch Configuration
	Power Consumption

Use Precautions

When multiple users configure the same device, you need to refresh the current configuration page to obtain the latest information if parameters on this page are modified by another user.

Web system login is supported on only Windows 7.0, Windows 8.0, Windows 8.1, Windows 10.0, and iOS operating systems.
The Web system supports Microsoft Edge, Internet Explorer 10.0, Internet Explorer 11.0, Firefox61.0 to Firefox66.0, and Google Chrome 64.0 to 73.0. Other browsers may not display the web page properly. In addition, JavaScript must be enabled in the browser.
When logging in to the web system using Internet Explorer, ensure that active scripting in the Security tab page is enabled. If this is disabled, an exception may occur during web system login.
The optimal resolution is 1316px. If the resolution is lower than 1280px, the system displays a prompt message.
By default, the earliest SSL version used in SSL policies on the device is TLS1.1. When logging in to the device through the web system, ensure that the SSL version supported by the browser is the same as that supported by the device. If the versions differ, an exception may occur during web system login. It is recommended that you upgrade the browser based on the displayed page or modify the SSL configuration. Take Internet Explorer as an example. Choose Tools > Internet Options, and click the Advanced tab to view and select the SSL version.
The web system identifies device information based on the Item value in the device's electronic label. However, the device hardware driver determines whether to start the device based on the BarCode value. Because the values of BarCode and Item may not be the same, the web system may not read or display the card information.
The web system does not support the operation of the back, forward, and refresh buttons provided by the browser. If you click these buttons, you may be redirected to the login page.
If you log in to multiple web systems with the same IP address using multiple browser tabs, only the latest login is saved. If the web systems have the same IP address and the same port number, the latest login account is displayed on earlier web pages after the browser tabs are refreshed. If the web systems have the same IP address but different port numbers, timeout messages are displayed on earlier web pages after the browser tabs are refreshed.
If the software version of the device is changed (for example, you perform an upgrade or roll back), clear the browser cache before using the web system. Otherwise, the web page may be displayed incorrectly.