Configuring Traffic Suppression in a BD

This section provides a sample of configuring traffic suppression in a BFD using the rpc method.

**Table 1** Configuring traffic suppression in a BD
Operation	XPATH
edit-config:merge	/huawei-bd:bridge-domains/bridge-domain

Data Requirements

**Table 2** Configuring traffic suppression in a BD
Item	Data	Description
BD	10	Configure a BD 10.
Broadcast traffic CIR	100	Set the broadcast traffic CIR to 100 kbit/s.
Broadcast traffic CBS	2000000	Set the broadcast traffic CBS to 2000000 bytes.
Multicast traffic CIR	100	Set the multicast traffic CIR to 100 kbit/s.
Multicast traffic CBS	2000000	Set the multicast traffic CBS to 2000000 bytes.
Unicast traffic CIR	100	Set the unicast traffic CIR to 100 kbit/s.
Unicast traffic CBS	2000000	Set the unicast traffic CBS to 2000000 bytes.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="4" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <bd:bridge-domains xmlns:bd="urn:huawei:params:xml:ns:yang:huawei-bd">
        <bd:bridge-domain xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0" xc:operation="merge">
          <bd:id>10</bd:id>
          <bd:qos>
            <bd:storm-control xc:operation="merge">
              <bd:broadcast>
                <bd:cir>100</bd:cir>
                <bd:cbs>2000000</bd:cbs>
              </bd:broadcast>
              <bd:multicast>
                <bd:cir>100</bd:cir>
                <bd:cbs>2000000</bd:cbs>
              </bd:multicast>
              <bd:unknown-unicast>
                <bd:cir>100</bd:cir>
                <bd:cbs>2000000</bd:cbs>
              </bd:unknown-unicast>
            </bd:storm-control>
          </bd:qos>
        </bd:bridge-domain>
      </bd:bridge-domains>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="0">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-path>/huawei-bd:bridge-domains/bridge-domain[id='NEED-A-VALUE-FOR-KEY-NODE!']/id</error-path>
    <error-message>parse rpc config error.(Invalid value in "id" element.).</error-message>
  </rpc-error>
</rpc-reply>