Software and Hardware Installation Precautions
RFID receivers are embedded in the APs as built-in cards, or connected to the APs through USB ports as external USB modules.
Only the AP2050DN, AP2050DN-E, AP2050DN-S, AP2051DN, AP2051DN-E, AP2051DN-S, AP4030TN, AP4050DN-E, AP4051DN, AP4051DN-S, AP4051TN, AP4151DN, AP5050DN-S, AP6050DN, AP6052DN, AP6150DN, AP7050DE, AP7050DN-E, AP7052DE, AP7052DN, WA375DD-CE, AP7060DN, AirEngine 5760-10, AP7152DN, R250D-E, and R251D-E can be used.
Among them, the AP4050DN-E, AP7052DN, AP7060DN, and AP7152DN can connect to RFID receivers through card slots or USB ports, while the other APs can connect to RFID receivers only through USB ports.
Service Planning Precautions
In infant abduction prevention and infusion management scenarios, only Layer 2 and Layer 3 networking architectures are supported, and NAT traversal is not supported.
Configuration Precautions
When Enjoyor IoT cards are used, it is recommended that static IP addresses be configured for APs. This is because IP addresses of IoT cards are added on Enjoyor servers and IoT cards use AP IP addresses for communication. If AP IP addresses are dynamically allocated through DHCP, AP IP addresses that dynamically change may be inconsistent with those added on Enjoyor servers.