decoding uri-cache

Function

The decoding uri-cache enable command enables the URI cache function.

The decoding uri-cache disable command disables the URI cache function.

By default, the URI cache function is enabled.

Format

decoding uri-cache enable

decoding uri-cache disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If no threat is detected from the corresponding session traffic after the URI cache function is enabled, the system will not inspect the session traffic with the same URI in a period of time. If all traffic must be inspected, disable the URI cache function.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

Example

# Enable the URI cache function.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] decoding uri-cache enable