delay-measure one-way threshold

Function

The delay-measure one-way threshold command sets the alarm threshold for one-way frame delay measurement.

The undo delay-measure one-way threshold command cancels the configuration.

Format

delay-measure one-way threshold threshold-value

undo delay-measure one-way threshold

Parameters

Parameter	Description	Value
threshold-value	Specifies the alarm threshold for one-way frame delay measurement.	The value is an integer that ranges from 1 to 4294967295, in microseconds.

Views

MA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The delay-measure one-way threshold command sets an alarm threshold for one-way frame delay measurement between a MEP and an RMEP. When the one-way frame delay exceeds the alarm threshold, an alarm is generated.

Precautions

IEEE 802.1ag has two versions: IEEE 802.1ag Draft 7 and IEEE Standard 802.1ag-2007. This command can be used only on the device running IEEE Standard 802.1ag-2007.

This command is applicable to VLANs.

Before setting the alarm threshold, you must correctly configure the MD and MA.

Example

# Set the alarm threshold for one-way frame delay measurement in the VLAN to 10.

<HUAWEI> system-view
[HUAWEI] cfm enable
[HUAWEI] cfm md md1
[HUAWEI-md-md1] ma ma1
[HUAWEI-md-md1-ma-ma1] map vlan 100
[HUAWEI-md-md1-ma-ma1] delay-measure one-way threshold 10