delay-measure two-way receive test-id

Function

The delay-measure two-way receive test-id command enables a Remote Maintenance Association End Point (RMEP) to receive Delay Measure Messages (DMMs) for two-way frame delay measurement (DM).

The undo delay-measure two-way receive test-id command disables an RMEP from receiving DMMs for two-way frame DM.

By default, the RMEP in a Maintenance Association (MA) is disabled from receiving DMMs.

Only the S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

delay-measure two-way receive test-id test-id

undo delay-measure two-way receive [ test-id test-id ]

Parameters

Parameter	Description	Value
test-id	Specifies the ID of a test instance.	The value is an integer ranging from 1 to 4294967295.

Views

MA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After running the delay-measure two-way continual send test-id or delay-measure two-way send test-id command to enable a MEP to send DMMs for two-way frame DM, run the delay-measure two-way receive test-id command to enable the RMEP to receive DMMs.

Prerequisites

A test instance has been created using the test-id command in the MA view.

Precautions

The delay-measure two-way receive test-id and delay-measure two-way receive commands are mutually exclusive.

Example

# Enable the RMEP to receive DMMs for two-way frame DM with the test instance of 1.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] port link-type trunk
[HUAWEI-GigabitEthernet0/0/1] port trunk allow-pass vlan 100
[HUAWEI-GigabitEthernet0/0/1] quit
[HUAWEI] set service-mode enhanced
Warning: This command will effect forward performance. Continue? [Y/N]:y
[HUAWEI] cfm enable
[HUAWEI] cfm md md1
[HUAWEI-md-md1] ma ma1
[HUAWEI-md-md1-ma-ma1] map vlan 100
[HUAWEI-md-md1-ma-ma1] mep mep-id 1 interface gigabitethernet 0/0/1 inward
[HUAWEI-md-md1-ma-ma1] remote-mep mep-id 2
[HUAWEI-md-md1-ma-ma1] test-id 1 mep 1 remote-mep 2
[HUAWEI-md-md1-ma-ma1] delay-measure two-way receive test-id 1