description (ERPS ring view)

Function

The description command configures the description of an ERPS ring.

The undo description command restores the default description of an ERPS ring.

By default, the description of an ERPS ring is the name of the ERPS ring. For example, if the name of an ERPS ring is Ring1, the default description of the ring is Ring 1.

Format

description text

undo description

Parameters

Parameter	Description	Value
text	Specifies the description of an ERPS ring.	The value is a string of 1 to 80 case-sensitive characters.

Views

ERPS ring view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the description command on the ERPS-enabled device to configure the description of an ERPS ring. The description contains information such as the ID of the ERPS ring, which facilitates maintenance.

Precautions

If you run the description command multiple times, only the latest configuration takes effect.

After the description is configured in the ERPS ring view, the description only takes effect on the device.

Example

# Configure the description of the ERPS ring 10 as huawei Ring 1 on the device.

<HUAWEI> system-view
[HUAWEI] erps ring 10
[HUAWEI-erps-ring10] description huawei Ring 1