description (tunnel-policy view)

Function

The description command configures the description of the current tunnel policy.

The undo description command cancels the setting.

By default, a tunnel policy does not have a description.

Format

description description-information

undo description

Parameters

Parameter	Description	Value
description-information	Specifies the description of the tunnel policy.	The value is a string of 1 to 80 case-sensitive characters with spaces.

Views

Tunnel policy view

Default Level

2: Configuration level

Usage Guidelines

After using the tunnel-policy command to create a tunnel policy, you can run the description command to configure a description of the tunnel policy to facilitate later query.

To check tunnel policy configurations, run the display tunnel-policy-config command.

Example

# Configure the description of the tunnel policy named test1.

<HUAWEI> system-view
[HUAWEI] tunnel-policy test1
[HUAWEI-tunnel-policy-test1] description two TE tunnels are used