The dhcp trust port command enables a DHCP trusted port in a WDS profile.
The undo dhcp trust port command disables a DHCP trusted port in a WDS profile.
By default, a DHCP
trusted port is enabled in a WDS profile.
Format
dhcp trust port
undo dhcp trust port
Parameters
None
Views
WDS profile view
Default Level
2: Configuration level
Usage Guidelines
After a DHCP trusted port is enabled in a WDS profile and the WDS profile is applied to an AP, the AP receives the DHCP OFFER, ACK, and NAK packets sent by authorized DHCP servers and forwards the packets to STAs so that
the STAs can obtain valid IP addresses and go online.
Example
# Enable a DHCP trusted port in the WDS profile test.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test
[HUAWEI-wlan-wds-prof-test] dhcp trust port