display ap provision

Function

The display ap provision command displays the configurations for an AP to go online.

Format

display ap provision ap-id ap-id

Parameters

Parameter	Description	Value
ap-id ap-id	Specifies an AP ID.	The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After you set parameters for an AP to go online in the AP view, you can run this command to view the detailed configuration.

Example

# Display configurations in the AP view.

<HUAWEI> display ap provision ap-id 2
-------------------------------------------------------------------------------- 
AP name               : 70d9-313c-3120 
AP group              : default 
AP address mode       : static 
IPv4 address          : - 
IPv4 mask address     : - 
IPv4 gateway address  : - 
IPv4 AC list          : - 
Management Vlan       : 2 
--------------------------------------------------------------------------------

**Table 1** Description of the **display ap provision** **ap-id** *ap-id* command output
Item	Description
AP name	AP name. To configure this parameter, run the ap-name (AP view) command.
AP group	AP group to which an AP belongs. To configure this parameter, run the ap-group (AP view) command.
AP address mode	Mode in which an AP obtains an IP address. To configure this parameter, run the address-mode (AP view) command.
IPv4 address	Static IPv4 address of an AP. To configure this parameter, run the ip-address (AP view) command.
IPv4 mask address	Static IPv4 mask of an AP. To configure this parameter, run the ip-address (AP view) command.
IPv4 gateway address	IPv4 gateway address of an AP. To configure this parameter, run the ip-address (AP view) command.
IPv4 AC list	AC IPv4 address list for APs. To configure this parameter, run the ac-list (AP view) command.
Management Vlan	Management VLAN tag carried in CAPWAP packets sent from the AP's wired interface. To configure this parameter, run the management-vlan command.