display access-user arp-detect control-point mac-ip

Function

The display access-user arp-detect control-point mac-ip command displays whether the source IP address and source MAC address of detection packets sent by an AS are configured to be the same as those used by an authentication control device for detection.

Format

display access-user arp-detect control-point mac-ip

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run this command to check whether the source IP address and source MAC address of detection packets sent by an AS are configured to be the same as those used by an authentication control device for detection.

Precautions

This command is supported only on authentication control devices.

Example

# Display whether the source IP address and source MAC address of detection packets sent by an AS are configured to be the same as those used by an authentication control device for detection.

<HUAWEI> display access-user arp-detect control-point mac-ip 
 access-user arp-detect control-point mac-ip: Enable

**Table 1** Description of the **display access-user arp-detect control-point mac-ip** command output
Item	Description
access-user arp-detect control-point mac-ip	Whether the source IP address and source MAC address of detection packets sent by an AS are configured to be the same as those used by an authentication control device for detection: Enable: yes Disable: no