display ap card

Function

The display ap card command displays details about AP cards.

Format

display ap ap-id card { all | card-number | usb }

Parameters

Parameters	Description	Value
ap-id	Specifies the AP ID.	The AP ID must exist.
all	Specifies all AP cards.	-
card-number	Specifies the number of an interface on an IoT card.	The interface number must exist.
usb	Specifies the USB interface on an IoT card.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run this command to query details about AP cards.

Example

# Display details about AP cards.

<HUAWEI> display ap 0 card all
Connected-status: The match status indicates that the card connection type matches   
that on the device. Otherwise, mismatch is displayed. To modify the effective connection  
type, run the card connect-type {serial|ethernet} command and restart the device.
-------------------------------------------------------------------------------- 
 Card                     : 1 
-------------------------------------------------------------------------------- 
 IOT card status          : absent 
-------------------------------------------------------------------------------- 
 Card                     : 2 
-------------------------------------------------------------------------------- 
 IOT card status          : present 
 Card connect type        : Serial
 Connected status         : mismatch
 Support card information : YES 
 Protocol version         : 1 
 Wireless standard        : RFID 
 Frequency                : 433M 
 Vendor name              : ENJOYOR 
 Card type                : TOEAPV1.2 
 Hardware version         : VA 
 Firmware version         : 0.1.0.1 
 Card serial number       : 0000000000000001 
 Baud-rate                : 115200
 Frame-version            : 1.0
 Antenna status           : External
 Card IP                  : 10.2.3.4
 Card MAC                 : 00e0-3344-5566
 Central frequency        : 2413MHz
 Card bandwidth           : 2413MHz
 Connect server status    : connected
 Server name              : -
-------------------------------------------------------------------------------- 
 Card                     : 3 
-------------------------------------------------------------------------------- 
 IOT card status          : absent 
-------------------------------------------------------------------------------- 
 Card                     : usb
-------------------------------------------------------------------------------- 
 USB status               : disabled
 IOT card status          : absent 
--------------------------------------------------------------------------------

**Table 1** Description of the **display ap card** command output
Item	Description
IOT card status	Card status. Present: An IoT card is installed. absent: No IoT card is installed.
Card connect type	Connection type between the IoT card and AP.
Connected status	Whether the actual connection type of an IoT card matches the current initialized connection type of the AP.
Support card information	Whether card information can be queried.
Protocol version	Protocol version. The current version number is 1.
Wireless standard	Wireless protocol supported by a card. The value is a 10-byte ASCII character set, for example, RFID, ANT, ZigBee, BT4.0, and Weightless.
Frequency	Card frequency. The value is an 8-byte ASCII character set, for example, 2.4G, 900M, 2.4/5G, and any value from 433M to 915M.
Vendor name	Vendor code. The value is an 8-byte ASCII character set, for example, ENJOYOR.
Card type	Card model. The value is a 12-byte ASCII character set, for example, TOEAPV1.2.
Hardware version	Hardware version of the card. The value is a 2-byte ASCII character set. The value is fixed in the following pattern: VA for the first version, VB for the second version, VC for the third version, and so on.
Firmware version	Firmware version of the card. The value is a 4-byte number, for example, 00.01.00.01.
Card serial number	Module ID of the card. The value is a 16-byte BCD character set.
Baud-rate	Baud rate for serial communication on an IoT card slot.
Frame-version	Frame format of an extension interface.
Antenna status	Whether an IoT card uses the built-in or external antenna. External: external antenna Internal: built-in antenna
Card IP	IP address of a card.
Card MAC	MAC address of an IoT card.
Central frequency	Center frequency of an IoT card.
Card bandwidth	Bandwidth of an IoT card.
Connect server status	Connection status between an IoT card and the server.
Server name	Name of the server connected to an IoT card.
USB status	Actual working status of the USB function on an AP.