display ap coordinate

Function

The display ap coordinate command displays information about longitudes and latitudes of APs.

Format

display ap coordinate { all | ap-group ap-group-name }

Parameters

Parameter	Description	Value
all	Displays information about longitudes and latitudes of all APs.	-
ap-group ap-group-name	Displays information about longitudes and latitudes of APs in the specified AP group.	The AP group must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view longitudes and latitudes of APs.

Example

# Display information about longitudes and latitudes of all APs.

<HUAWEI> display ap coordinate all
---------------------------------------------------------------------------------------------------------
ID   Name             Group      Longitude            Latitude
---------------------------------------------------------------------------------------------------------
0    00d5-ada8-1c00   default    30.1111111°E         40.2222222°N 
1    244c-075f-ec20   default    110°59′59"W          77°25'53"N
2    644c-075f-ec20   default    -                    -
--------------------------------------------------------------------------------------------------------
Total: 3

**Table 1** Description of the **display ap coordinate** **all** command output
Item	Description
ID	AP ID.
Name	AP name.
Group	AP group.
Longitude	Longitude of an AP. Its display varies depending on the format: Example: 114°3′14″E in the format of degree/minute/second Example: 114.3435°E in the format of decimal degree Hyphen (-) if it is not configured
Latitude	Latitude of an AP. Example: 114°3′14″S in the format of degree/minute/second Example: 114.3435°S in the format of decimal degree Hyphen (-) if it is not configured